94 Item Items
Warning: Last items in stock!
The ideal product to dampen engines with a medium to high noise-level. By combining a vibration-absorber with a voluminous fleece both high and low frequencies are eliminated very effectively. The mean noise-reduction of 24,03 dB (measured in the Apamat II) is reduced to an absolute minimum. Installation is easy due to the self-adhesive backing of all our products. When the sheets are installed "over-head" we recommend additionally a mechanical protection. For this we offer also 2 different fixing-sets. In order to cut the material to size we recommend to use an electrical jig-saw with a special blade which you can also order from us. To close the open edges and joints between to sheets please use our sealing-tape.
|Strength||45 mm - 50 mm|
|Weight||5,7 kg / m²|
|Sound level reduction||20,0 dB – 24,9 dB|
|average sound level reduction (Apamat measure)||24,03 dB|
|Typ of sound insulation||Airborne sound|
|Place of application||Engine room, generator|
|Surface||grid and aluminized PE-film|
|With vapour barrier||No|
|Temperature range||up to 90 °C|
Sealing-tape for sealing the edges of the insulation-material after cutting. Sealing-tape 10 cm wide tape is for: RECYtherm W1300 A CS, RECYguard W1300 (G)A CS, RECYcombi W1300 GA CS, ....